The versatility of Pneumatic high pressure grouting pumps

Peumatic Grouting pump is designed for pressure and filling grouting of cement and bentonite slurries. It is primarily used for injecting (grouting) bar anchors and the drill holes in order to reinforce the free rock mass. The maximum grain measurement can’t exceed 0.2 mm.
Grouting pump operation and maintenance is simple, protected and reliable. This pump is utilized in mines working underneath difficult circumstances as a outcome of it’s reliable and explosion-proof.
Basic Pneumatic Grouting pump include: An air inlet, the pneumatic cylinder, mounting base frame and stand, pressure gauge, pumping cylinder, outlet with quick launch coupling and wheels.
How it actually works
Pneumatic strain in the air cylinder exerts a excessive stress on the grout mixture which ends up in ejection of grout with a high strain and velocity. The valves of the air cylinder in the pump function automatically to actuate the cylinder. The pneumatic cylinder then moves the plunger up and down to complete the pumping cycle.
Pneumatic grout pump can be pushed even with out Electrical energy supply in distant areas by using engine driven compressor.
The pump is majorly used in building and mining industry for injecting material into extensive and medium dimension hole in beams, columns ,basement partitions and flooring, carry shaft concrete wall fill-up and so on. In mining business it is used to replenish cement answer where there’s a hole exists between construction and rock and for soil stabilization.
Detachable design tends to easy upkeep and transportation. Challenging works like Grouting in Bridges.
READ: How hydraulic submersible pumps work
This pump is broadly used in tunnels, coal mine, bridges and dams, constructing foundation, and different underground tasks, and inflammable, explosive websites and other bad environment.
ชนิดของpressuregauge has application in chemical industry additionally to pump out chemical slurries.
The pump is electricity free so, can be utilized at any website situation whether it is rural or city.
Mining Pneumatic Grouting pump has a larger discharge slurry adjustment vary. Generally the final quantity of the grouting quantity is 8 or10 occasions of the quantity at first. And the final grouting quantity proves that filling is compacted.
Simply put; Pneumatic high-pressure grouting pump is specifically designed for high-pressure grouting. And it adopts full hydraulic drive, it’s pressure and flow may be adjusted according to the necessities of grouting,(The circulate of grouting pump is 0-100L/min, stress of discharge is 0-10MPa).in addition to, This Pneumatic high-pressure grouting pump can be used for grouting single or double fluid.
High-pressure grouting pump is especially used for highways, railways, water and electricity, development, mining and so forth. ground/underground development.
Mining Pneumatic Grouting pump has the advantages of low vitality consumption, small vibration, low noise, small dimension, high effectivity, reliable performance, pressure and flow control, long life and so on. Common mine grouting pump has pneumatic injection pump, dual fluid injection pump, extrusion injection pump and piston injection pump.
Pneumatic grout pump is also Light weight and with a wheelie design it might be carried easily. It is designed for straightforward operation and low maintenance. Last but not least its spare elements are simply available.

Leave a Comment